Hot Link Pro™ revolutionizes how Infrared, IR, remote controls and hidden AV gear are used. By “seeing” even the weakest IR commands from remote controls, direct line of sight is no longer needed. Hot Link’s super sensitive IR eye can be hidden and still see IR remote commands.

Tuck the Eye behind a Flat Panel Display and place Hot Link Emitters on hidden AV gear to relay the IR signals from the remote. The Blue Confirmation LED can be placed in a slot or on the edge of a TV or not used at all. Plug power supply in and start controlling hidden Av gear!

IR Eye mounts in a hidden location where it can “see” the room the remote is in. Mount on the back of a Flat Panel Display, furniture, speaker, or behind a speaker grille, door slot and more. 6 feet long. Use RG6 with F to RCA adapters to extend.

Blue Confirmation LED is used to measure and mitigate IR noise and confirms commands received from the remote. 7 feet long.

Emitters are placed directly over IR sensor on home theater equipment to be controlled.

Eye Mounting Hardware is a small mounting kit with a screw tab and velcro to mount the eye almost anywhere.

Main Box mounts anywhere, back of TV, in AV cabinet or room. 3 inches by 2 inches by 1 inch.

Ribbon Cable is meant to be peeled apart for appropriate emitter length. Roll up what is not used and store with main box in back of cabinet. 7 feet long on Hot Link Pro and Hot Link XL, 8 feet long for Hot Link Pro X12.

Power supply plugs into standard 120 VAC wall outlet. 6 foot cord.