Hot Link Accessories
Application and Installations, Wiring Diagrams: Hot Link
Pro has a Receiver Eye, 6 or 12 emitters depending on model, 1 blue Confirmation
LED that can be used to detect noise signals as well as remote commands,
a Main Amplifier Box and a wall plug-in Power Supply, (not shown for clarity).
Adding an Eye location: The Eye with Y Kit allows you
to have two inputs for Hot Link Pro from 2 rooms. Perhaps you have 2 rooms
that are adjacent. Just use one Eye in each room with one coax cable traveling
through to the next room. The second Eye can also be used to receive IR
Signals from another IR output device like a whole house controller. If
your secondary Location is not adjacent but is within 25 feet simply add
a Mini Coax Eye Extension Cable with an Eye with Y Kit to place a secondary
Receiver Eye in a location within 28 feet of the Hot Link Pro. Using Coax
Cables will reduce the sensitivity of the remote-to-eye distance to about
28 feet.
 |
Eye with Y Kit PN HLPEYEY ($44.95) 
|
 |
Coax Eye Extension Cable 25 feet ($39.95)
|
 |
Emitter Extension Kit PN HLPEXT ($29.95)
|
 |
Emitter Expansion Kit X6 PN HLPEXP ($29.95)
|
 |
Extra Power Supply ($15.00)
|
 |
Bezel for Hot Link Eye ($10.00)
|
 |
Hot Link Professional 1-watt LED Flashlight ($24.95)
|
 |
Hot Link Emitter Tape (FREE)
|